Showing 1–12 of 56 results
ABS PLASTIC COLUMN STORAGE CABINET
₹15,600.00 – ₹20,500.00| Part No | Description |
| CSC-6P | Capacity : 60 HPLC columns (6 drawers) |
| CSC-12P | Capacity : 120 HPLC columns (6 + 6 drawers) |
Air Vent Filter
₹0.00Product Details:
| Filtration Grade | Pre Filter |
| Medium Material | Active Carbon, Microfiber |
aterials of Construction
| Filter Media | Nylon66/PTFE/PP/PVDF |
| Support Housing | PP |
| Sealing technology | Thermal Bonding, No Adhesives |
| Dimensions | |
| Outer Diameter | Nylon66/PP/GF/PVDF |
| Inlet/Outlet | 7~13 mm stepped hose barb connection with 12x 9 |
| Filtration Area, ft2 | |
| ā„ 0.021 | |
| Pore Size, Ī¼m | |
| Please refer to Ordering Information. | |
| Maximum Operating Pressure | |
| Forward: 3.5 bar @ 23Ā°C and 3.0 bar @ 60Ā°C for liquid; 3.0 bar @ 23Ā°C and 2.5 bar @ 60Ā°C for air gas. | |
Capsule Filtration System For Solvents
₹0.00Specification :
- Very high flow rates (1-5lpm) resulting in much reduced filtration time even with 0.2Ī¼m capsule filters
- Very low hold-up volume helps minimize loss of expensive drug solutions
- Occupies very less laboratory space due to its compact design
Application :
- Compact design
- Wide chemical compatibility
- Available in 5 ltr upto 20-liter capacity to filter volumes ranging from 500ml to 20 liters
- All components are of SS316L stainless steel
- No polymeric tubing is used
- Filters offered are Nylon-66 membrane capsule filters type DNL
Component :
SS316L, 5 liter Pressure Vessel with vent – valve and a special extended outlet connection to fit capsules with 1/4″ MNPT Inlet
Technical Parameters :
Capacity: 5ltr , 10ltr , 20Ltr ,50Ltr
Vessel: MOC SS 316L
O-Ring: Seal Silicon
Inlet Connection: 1ā4 ( BSPF) , 1.5ā TC
Degassing Chamber
₹0.00- Stainless steel chamber for long-term air-tightness performance. Vacuum chamber has a rounded edge at the top, for the protection of silicone gasket.
- Ā Vacuum gauge is assembled on a separate port, so that the reading remains accurate even while pumping/venting the chamber. –Gauge reading in both in Hg and Mpa.
- All kits are vacuum tested for 24 hours before packaging. (leakage less than 2.0 inHg at 24 hours) ļ· Two-sided flappable vacuum gasket for better durability and reliability. ļ· The gasket is chemically resistant to butane and other solvents.
- 25 mm thickness Acrylic lid for long life and clear visibility.
- Strong elastic food grade silicone vacuum hose can connect/disconnect easily with the pump/chamber.
- 50um air-filter on the vent valve to reduce air flow and prevent any dust/powder flowing into the chamber.
- Ā Easy to install and low-cost to maintain the chamber can be assembled in 5 minutes
Dispensing Pressure Vessels & Filtering Jet Gun
₹0.00Product Description:
Apply a concentrated jet spray of ultra cleaned solvent of rinse solution to surfaces that require washing. Just connect the Filter Jet dispenser to a dispensing vessel to ensure that the solvent or other liquid is filtered immediately before dispensing.
Applications:
Solvent Filtration Prior to Contamination Analysis, Solvent Rinsing of Machined Parts and Collection Containers Stainless steel filter holder and filter support screens; Polypropylene Handle dispenser; PTFE valve; polyethylene pressure tubing; stainless steel jet nozzle 0.5mm
Disposable M-Funnel
₹45.00Specification
ā¢ Support screen: PPSU
ā¢ Stopper: Silicone Rubber
ā¢ Clamp: Magnetic
ā¢ Filter Size: 47mm.
ā¢ Filtration area: 9.6 cm2
Disposable Syringe Filter (Non Sterile)
₹0.00Standard Dimensions
13mm, 0.45um / 0.22um
25mm, 0.45um / 0.22um
Non Sterile
Nylon Syringe Filter
PTFE Syringe Filter
PES Syringe Filter
PVDF Syringe Filter
GF Syringe Filter
MCE Syringe Filter
PP Syringe Filter
Disposable Syringe Filters (Disposable)
₹850.00 – ₹1,300.00| PVDF | PES | NYLON | PTFE | |
| Membrane material and Pore size | PVDF 0.45 m | PES 0.45 m | Nylon 0.45 m | PTFE 0.22 m |
| Wettability | Hydrophobic | Hydrophilic | Hydrophilic | Hydrophobic |
| Housing Material | Polypropylene | Polypropylene | Polypropylene | Polypropylene |
| Inlet/Outlet | Female luer lock/Male luersilp | Female luer lock/Male luersilp | Female luer lock/Male luersilp | Female luer lock/Male luersilp |
| Maximum Operating Temp(Ā°C) | 100 | 50 | 100 | 130 |
| Filtration area(cm2) | 2.89 | 2.89 | 2.89 | 0.92 |
| Holdup volume (Ī¼l) | 30 | 100 | 30 | 10 |
| Volume Throughput (ml) | 100 | 100 | 100 | 12 |
| Bubble point(psi) | 10 | 44.9 | 30 | 18 |
Fluid Contamination Test Kit
₹0.00Fluid contamination analysis kit consists of assorted filtration products suited for contamination measurement and control. Contamination Test kit is recommended for ensuring conformance to cleanliness standards popularly known as The kit includes the apparatus shown except standard equipment such as weighing scale, drying oven, microscope, Pettri dish, membranes, grounding set, etc.
Available in two versions: Patch kit and Professional kit
Gas Sampling Bomb
₹3,400.00 – ₹4,900.00We are manufacturer and supplier of Gas Sampling bombs. Consists of Sampling Cylinder as per Below Dimensions.
Two Needle Valves, One Needle Valve is Straight type and other is Angle Type, One at Inlet and One at Outlet.
Supporting Pipe Nipple may be used as per requirement.
| AE500 | 1/4ā | 5000 | 500 | 500 | 50.8 | 2.5 |
| AE1000 | 1/4ā | 5000 | 1000 | 1000 | 88.9 | 4.6 |
Glass Filter Holder
₹2,100.00 – ₹12,500.00ā¢ MOC : Borosilicate Glass
ā¢ Support screen : Sintered Glass
ā¢ Stopper : Silicone Rubber
ā¢ Clamp : Anodized Aluminum
