Showing 25–36 of 56 results
Nitrogen Evaporator
₹125,000.00 – ₹225,000.00Product Speciļ¬cation:-
- Time Range 0 to 255min
- Time Set-up / Down arrows keys (1 min increments)
- Temperature range: Ambient to 140oC (Thermal cutout for safety)
- Temperature set-up / Down arrows keys ( 0.1Ā°C Increment )
- Start / Stop Yellow led indication when procession
- Gas Stations with Led indication
- Controlled: Full Microprocessor based
- Sample capacity: As per Requirement
- Gas line ā depend on sample capacity Water tank Capacity: 6.5 L. (Gross capacity 8 L) Inbuilt water draining system with manual valve
- Power Supply 230Vac / 3amp
Nitrogen Evaporator (50 Sample)
₹283,375.00Nitrogen Evaporator Model: AE-EV-50 is a Precision Sample Concentrator by Nitrogen Purging. It is a newly designed Sample Concentratorfor multiple sample pre-concentration in organic media. A Table Top Model. The unit can be set to constant Flow and constant Temperature to ensure good evaporation.
It is fully microprocessor controlled and water bath, Temperature, gas station, and more advantage LCD display, over Temp. Heater ON/OFF LED, door open display, high-temperature Thermal cutoff for safety for the best quality and best performance. AONE offers a range of Nitrogen Evaporator Concentration Workstationsforsample evaporation. This guide is designed to help you select the most suitable Nitrogen Evaporator for your research requirements. All Nitrogen Evaporators use a vortex evaporation technology that increases the speed of evaporation by a factor of 10 compared to other techniques.
The combination of gas flow and temperature is then used to optimize the sample drying. Nitrogen is recommended as the best choice for the gas because it is inert and minimizes the risk of oxidation.
As gas usage can be high if large numbers of samples are prepared nitrogen generator bulk liquid nitrogen supply is recommended to minimize cylinder handling.
Pellet Die Set
₹3,800.00 – ₹19,500.00Evacuable KBr Die Set is used to form pellets/circular discs for IR-FTIR Solid Sampling /Analytical Purpose.
Most commonly used die is of 13 mm dia. pellet size. 13 mm KBr Die consists of a two-piece outer die, tungsten carbide mirror finished punches (envils), pusher rod and pellet removal ring. Die is fitted with a nozzle for evacuation ( if required ).
The die is manufactured from hardened stainless steel and can be easily dismantled for cleaning purposes .
The entire set is enclosed in a velvetted teak-wood box , for safety and durability. The Die can be subjected to a Max. Load of 15 Tons.
Pellet holder
₹950.00 – ₹1,200.00Ā Pellet Holders to suit the above sizes are
13 mm Aluminum Anodized Pellet Holder.
Available Size :
- 8mm
- 10mm
- 13mm
Pressure Filtration Holder
₹14,500.00 – ₹32,500.00Pressure FIltration Holders
- Seal membrane by hand tightening locking wing nuts
- Optimal holder design minimizes resistance and maximizes ļ¬ow rate
- Each unit labeled with identifying serial numbers on the outside of both the inlet and outlet plates
Applications
- Use in-line for ļ¬ltering gases or liquids
- Use with pressure vessel for batch type operations
| Ā | MFH90 | MFH142 | MFH293 |
| Inlet Pressure | 99 psi | 99 psi | 99 psi |
| Differential Pressure | 42 psi | 42 psi | 42 psi |
| Filtration Area | 45 cm2 | 113 cm2 | 530 cm2 |
| Pre filter size | 76 mm | 124 mm | 257 mm |
SDI Test Kit Complete
₹22,781.25Product Description:
SDI test kit is a compact, lightweight unit suitable for monitoring Silt Density Index. Additionally, its portability makes it ideal for troubleshooting and routine monitoring of multiple Lab, Industrial RO Water systems.
Ā Manual SDI test kit contents
- SS316, 47mm Filter Holder
- 45Āµm 47mm filter papers
- Pressure Gauge & Pressure Regulator
- On /Off Valve
- Stopwatch
- Measuring Beaker 500
- Forceps SS
- With Box
- Manual
SDI Test Kit Holder
₹15,491.25Silt Density Index Kit Contents:-
SS316, 47mm Filter Holder
45Āµm 47mm filter papers
Pressure Gauge & Pressure Regulator
On /Off Valve
Stopwatch
Measuring Beaker 500
Forceps SS
SDI Test Kit with Booster Pump
₹21,870.00Booster Pump kit contents.
- SDI Booster Pump, 220 VAC 50/60Hz
- Connector- 8 mm PU Tube
- Pressure Gauge & Pressure Regulator
- With Case Box
- Manual
Solid Phase Extraction Manifold
₹32,000.00 – ₹48,000.00Product Description:
- Rectangular Acrylic Cabinet
- Polypropylene Lid
2 Sizes Available:
- Small For Up To 12 Columns Cartridges
- Large For Up To 12 Columns Or Up To 24 Cartridges
Available Port: 12, 24.
Specifications:
- Vacuum Gauge For Pressure Reading
- Control Valve For Adjustment Of Vacuum
- Replaceable Valves For Vacuum Control Of Individual SPE Columns
- Variable Rack with Exchangeable Partitions, Which Accept A Wide Variety Of Vessels Like Test Tubes, Measuring Flasks, Scintillation Vials, Autosampler Vials, Plastic Vials Etc.
- 20um Columns With 5-10 Ml Sample Reservoir For Medium Size Samples
- Polypropylene Sample Reservoir (5 Or 50 Ml Available)
- Adapter For Sample Reservoirs
- SPE Manifold Tubing Adapters
Solvent Filtration Assembly (Glass Filter Holder B40)
₹7,400.00 – ₹8,000.00Funnel : Glass Filter Holder
Filtration Flask:-
MOC : Borosilicate Glass
Capacity : 1000ml, 2000ml, 5000ml
Rubber Stopper : (Depend on Flask Size)
Solvent Filtration Assembly (Hydroļ¬l Filter Holder )
₹15,400.00Funnel : Hydrauļ¬l Filter Holder
Filtration Flask:-
MOC : Borosilicate Glass
Capacity : 1000ml, 2000ml, 5000ml
Rubber Stopper : (Depend on Flask Size)
