Showing all 7 results
Pressure type filter holders can be used for ultracleaning or sterilizing liquids and gases. AONE holders have been designed to maximize flow rates and to minimize holder resistance and can be used in either batch or continuous filtration procedures.
Advantages of Pressure Filtration
ā¢ Higher differential pressures are possible, resulting in higher flow rates. The pressure differential across the membrane is not limited to atmospheric pressure (ā„14.7 psi)
ā¢ Unintentional contamination downstream of the membrane is minimized.
Capsule Filtration System For Solvents
₹0.00Specification :
- Very high flow rates (1-5lpm) resulting in much reduced filtration time even with 0.2Ī¼m capsule filters
- Very low hold-up volume helps minimize loss of expensive drug solutions
- Occupies very less laboratory space due to its compact design
Application :
- Compact design
- Wide chemical compatibility
- Available in 5 ltr upto 20-liter capacity to filter volumes ranging from 500ml to 20 liters
- All components are of SS316L stainless steel
- No polymeric tubing is used
- Filters offered are Nylon-66 membrane capsule filters type DNL
Component :
SS316L, 5 liter Pressure Vessel with vent – valve and a special extended outlet connection to fit capsules with 1/4″ MNPT Inlet
Technical Parameters :
Capacity: 5ltr , 10ltr , 20Ltr ,50Ltr
Vessel: MOC SS 316L
O-Ring: Seal Silicon
Inlet Connection: 1ā4 ( BSPF) , 1.5ā TC
Dispensing Pressure Vessels & Filtering Jet Gun
₹0.00Product Description:
Apply a concentrated jet spray of ultra cleaned solvent of rinse solution to surfaces that require washing. Just connect the Filter Jet dispenser to a dispensing vessel to ensure that the solvent or other liquid is filtered immediately before dispensing.
Applications:
Solvent Filtration Prior to Contamination Analysis, Solvent Rinsing of Machined Parts and Collection Containers Stainless steel filter holder and filter support screens; Polypropylene Handle dispenser; PTFE valve; polyethylene pressure tubing; stainless steel jet nozzle 0.5mm
Disposable Syringe Filter (Non Sterile)
₹0.00Standard Dimensions
13mm, 0.45um / 0.22um
25mm, 0.45um / 0.22um
Non Sterile
Nylon Syringe Filter
PTFE Syringe Filter
PES Syringe Filter
PVDF Syringe Filter
GF Syringe Filter
MCE Syringe Filter
PP Syringe Filter
In Line Filter Holder
₹8,900.00 – ₹12,500.00Product Description:
- 47mmĀ filterĀ diameter
- Available in type 304ss or 316ss
- FilterĀ liquids or gases at point-of-use
ThisĀ 47mmĀ in-lineĀ holderĀ (Model IFH47) is available in both type 304 or 316 stainless steel. The PTFE coated support screen prevents sticking of the membrane during autoclaving. The back-pressure support screen protects theĀ filterĀ from rupture during reverse pressure surges. Upstream vent enables venting at any time during filtration. Dual sealing system compresses filter to ensure no lateral wicking / leaking.
Inline Filter Holder
₹0.00Product Description:
ā¢ 47mm filter diameter
ā¢ Available in type 304ss or 316ss
ā¢ Filter liquids or gases at point-of-use
This 47mm in-line holder (Model IFH47) is available in both type 304 or 316 stainless steel. The
PTFE coated support screen prevents the sticking of the membrane during autoclaving. The back-
pressure support screen protects the filter from rupture during reverse pressure surges. Upstream
vent enables venting at any time during filtration. The dual sealing system compresses filter to ensure
no lateral wicking/leaking.
The locking ring enables filter changes without disconnecting from lines. Unit comes standard with silicone o-
ring and FPM vent o-ring. When filtering gases, it is recommended that a second support screen be used
upstream of the membrane. Replacement parts and alternate o-ring materials are available.
Applications:
Sterilize and ultraclean liquids and gases under positive pressure. Sterilize with membrane in place for microbiological studies.
Install for point-of-use filtration on filling machines. General particulate analysis
Pressure Filtration Holder
₹14,500.00 – ₹32,500.00Pressure FIltration Holders
- Seal membrane by hand tightening locking wing nuts
- Optimal holder design minimizes resistance and maximizes ļ¬ow rate
- Each unit labeled with identifying serial numbers on the outside of both the inlet and outlet plates
Applications
- Use in-line for ļ¬ltering gases or liquids
- Use with pressure vessel for batch type operations
| Ā | MFH90 | MFH142 | MFH293 |
| Inlet Pressure | 99 psi | 99 psi | 99 psi |
| Differential Pressure | 42 psi | 42 psi | 42 psi |
| Filtration Area | 45 cm2 | 113 cm2 | 530 cm2 |
| Pre filter size | 76 mm | 124 mm | 257 mm |
Syringe Filter Holder
₹750.00 – ₹950.00Specifications:
- Materials: SF-13,SF-25
- Body and support : SS316
- Gasket: PTFE
- O-ring : PTFE
